Skip to content

Industrial AI & IT/OT Integration

Can JoulesLabs take your industrial AI from a stalled pilot to a working production line?

JoulesLabs connects your shop-floor operational technology to your top-floor IT, so an industrial AI pilot runs on a real production line instead of living in a slide deck. Legacy PLC retrofit, the OT/IT convergence layer, edge deployment and OT security.

Start by finding where your pilot will break, free, with the Shop-Floor-to-Top-Floor readiness self-check below. No obligation, and you leave knowing the first fix.

  • 40+ products since 2017
  • 20+ engineers
  • 5.0 on Clutch
  • 4.8 on Google
  • 93% on-time
  • UK, EU, GCC and USA

Yes, by treating the integration layer as the real work. JoulesLabs is an AI product and systems engineering partner that connects shop-floor operational technology (OT) to top-floor IT, so an industrial AI pilot can run on a real line instead of a controlled demo. It is for a plant or operations leader, a VP of Manufacturing, a Plant Director, a Head of OT, or the enterprise IT lead asked to connect the floor to ERP, MES, CMMS and EHS. Most industrial AI pilots do not fail on the model; they fail on the wall between OT and IT, so that is where we work: legacy PLC retrofit, secure OT data extraction, and the OT/IT convergence layer that carries floor data into business systems.

One scope note up front: JoulesLabs has shipped 40+ products since 2017 and runs production DevOps for high-scale platforms, and we have not yet put a client AI agent into live industrial production. So every industrial and OT use case here is our approach, grounded in nine years of shipped product builds, reviewed by JoulesLabs' CTO, for teams in the UK, EU, GCC and USA.

Last updated: November 2026

The readiness self-check Where will your industrial AI pilot break, and what do you fix first?

Before you spend on any build, locate your plant on the shop-floor-to-top-floor sequence. Each stage is a yes or no you can answer about your own site, and the stages run in order: you cannot skip one without the next one breaking.

  1. Stage 1: OT data access

    • Foundations
    • Fix this first

    The question: can you pull clean, secure data off your existing PLCs and lines today? If not, a model is premature, so the retrofit comes before anything else.

  2. Stage 2: Convergence layer

    • Foundations
    • Then this

    The question: does OT data reach your ERP, MES, CMMS and EHS through a real integration layer, or is it stranded on the floor? This is where the ROI case is built, and where pilots stall.

  3. Stage 3: Edge readiness

    • Build on it
    • Next

    The question: can you run inference at the edge, where latency and uptime demand it, and manage models across sites without a trip to each plant?

  1. Stage 4: Predictive

    • Build on it
    • Next

    The question: is your data trustworthy enough to predict equipment failure before downtime, at the near-zero error margin industrial work demands?

  2. Stage 5: Agentic production

    • Under oversight
    • Last, under oversight

    The question: are stages 1 to 4 solid? Only then can agents schedule maintenance and order parts safely. Anyone selling stage 5 without stages 1 to 4 is selling a demo.

An OEM platform or a scale program alone will not place your pilot on the line. A stalled industrial pilot needs the one blocked stage re-engineered by hand, which is why the self-check names it before anyone quotes you a package.

How we build How does JoulesLabs move an industrial AI pilot from the shop floor to production?

The work runs in phases, in order: secure the OT data, build the OT/IT convergence layer, deploy models at the industrial edge, then add predictive and, under oversight, agentic control once the data is trustworthy. The order matters more than the model.

  1. Secure the OT data and retrofit legacy PLCs.

    You cannot run a 2026 AI model on data trapped in a 1980s PLC, so secure OT data extraction is the first step.

  2. Build the OT/IT convergence layer.

    Floor data reaches ERP, MES, CMMS and EHS through one data-aggregation layer, usually over an event bus such as Kafka or Azure Service Bus. Delivered as production OT/IT data engineering.

  3. Deploy models at the industrial edge.

    Inference runs on the line on hardware such as NVIDIA Jetson, Siemens Industrial Edge or Rockwell FactoryTalk Edge, with models managed across sites.

  4. Add predictive, then agentic, under oversight.

    Once the data layer is trustworthy, models predict failure before downtime, then recommend the fix, and only then, under human oversight, schedule maintenance and order parts.

“The convergence layer. Teams get a model working on exported sensor data, then try to wire it into the MES or CMMS afterwards and find timestamps that do not line up, tags nobody documented and a network the OT team will not open. The model was never the problem. The plumbing between the floor and the business systems was.”

— Mehedi Hasan Nahid, CTO, JoulesLabs

Deliverables What do you get in an industrial AI and IT/OT integration engagement?

Each engagement is scoped from six components: OT/IT data integration, edge deployment, predictive maintenance, vision inspection, safety and change management, and OT security. The highest-value components depend on the data layer being right first, so the order is part of the deliverable.

ComponentWhat it does for youWhere to start
OT/IT data integrationWires IIoT into ERP, MES, CMMS and EHS so floor data drives business decisions.The convergence layer, before any model.
Edge deployment and managementRuns and updates models on the line where latency and uptime demand it.One line, one model, managed centrally.
Predictive maintenanceFlags equipment failure before it stops the line, once the data is trustworthy.Your highest-downtime asset class.
Vision inspection on the lineCatches defects with industrial visual inspection at line speed.One defect type, in parallel with QC.
Safety, roadmap and change managementGives OT teams the sequence and the training a rollout needs.The readiness self-check.
Protocol, SCADA and OT securitySegments and protects OT against production-stopping attacks.Network segmentation on the pilot line.

Industrial AI models need a far tighter error margin than consumer AI, because a false positive can stop production. Predictive maintenance typically reduces machine downtime by 30 to 50% and extends machine life by 20 to 40% (McKinsey, 2017).

“OT security. Buyers budget for the model and the edge hardware, then discover that connecting a line means segmenting the network, reviewing every new path into the plant and getting the OT team to sign off. That work is slow, careful and non-negotiable, because a mistake there can stop production rather than leak an email.”

— Mehedi Hasan Nahid, CTO, JoulesLabs

How does JoulesLabs move you from predictive maintenance to agentic production?

Once the data layer is trustworthy, models can predict equipment failure before downtime, then recommend and schedule the fix, and finally let agents order parts and adjust production flow under human oversight.

Predictive: fewer unplanned stops. Models flag equipment failure early enough to plan the repair, and the downtime figures above describe mature programmes, not JoulesLabs results. Built on predictive maintenance models.

Prescriptive: it recommends and executes the fix. With the convergence layer in place, the system recommends the action and schedules it against your maintenance windows.

Agentic: our approach, demo-gated. Agents that order parts and adjust production flow are the next step. For JoulesLabs it is our approach, demo-gated, and it depends on the convergence layer existing first.

“Predictive maintenance is shippable wherever the sensor data is clean and the failure modes are known: a model flags the risk and a planner decides. Agentic production, where software orders parts or changes the schedule itself, is still our approach. We demo it and keep it behind human approval until a client line proves it safe.”

Mehedi Hasan Nahid, CTO, JoulesLabs

Proof What has JoulesLabs actually shipped for industrial clients?

We will be direct: JoulesLabs has not yet put a client AI agent into live industrial production, so this service leads with method, not an industrial case study.

  1. What has shipped

    40+ web, mobile and SaaS products since 2017, a 20+ person team, 5.0 on Clutch, 4.8 on Google, 93% on-time delivery, a 2.5+ year average client relationship, and production DevOps for high-scale platforms. AI shipped as features: AI review replies in ReviewXpo and ReviewX, a live Legal Clause Spotter, Estimate AI, with Meetense launching December 2026 (launching, not live).

  2. What is adjacent

    FundedNext is a large-scale BFSI (prop-trading) platform, backend and DevOps build. It shows production engineering at scale, framed as adjacent, never as industrial AI proof.

  3. What is still our approach

    every industrial and OT use case on this page, including manufacturing AI.

Never credit the Timetics AI agent to JoulesLabs: the Timetics platform and DevOps are a JoulesLabs build, the AI agent is Arraytics'.

“FundedNext is the closest match in engineering terms, even though it is finance, not manufacturing. We built the backend and run the DevOps for a large-scale platform where downtime costs real money and users notice at once. That is the same discipline a plant integration needs. We call it adjacent proof, not industrial proof.”

— Mehedi Hasan Nahid, CTO, JoulesLabs

“On a production line the model is the easy part. What decides the outcome is whether clean data arrives on time from old equipment, whether the answer reaches the system that acts on it, and whether the OT network stays safe. Get the integration layer right and a modest model pays off. Get it wrong and nothing ships.”

— Mehedi Hasan Nahid, CTO, JoulesLabs, November 2026

Risk reversal What happens if the pilot disrupts production or the model gets it wrong?

You keep control: new systems run in parallel with your existing line, billing tracks milestones, a small pilot is scoped first, and you own the IP and the data.

  1. Parallel run

    New systems run alongside your existing line until they prove out.

  2. Milestone billing

    Billing tracks the phases of the work, not an upfront lump sum.

  3. Scoped pilot first

    One line, one workflow, before any scale.

  4. You own the IP and the data

    You keep the code, the models and the data, with no platform lock-in.

OT cyberattacks can halt physical production, unlike an office IT breach, so IT/OT network segmentation and IEC 62443-4-2 aligned security are part of an industrial engagement. Delivered with OT security and IT/OT segmentation.

“The parallel run. A plant cannot pause the line to test our work, so the new system watches the same signals beside the existing one, and its recommendations are checked against what operators actually did. Nothing it says changes the line until the plant team has seen enough to trust it. Output stays protected throughout.”

— Mehedi Hasan Nahid, CTO, JoulesLabs

Pricing What does an industrial AI and IT/OT integration engagement cost?

Engagements are custom-quoted because scope varies by site, and JoulesLabs first contracts typically run between USD 20,000 and 50,000, with any OEM platform licences billed separately. Three things move the quote: the number of lines, the age of the legacy PLCs, and the OT security scope. Getting a stalled pilot across the line is also move a stalled pilot to production work.

Ready to get your industrial AI pilot onto the line?

Tell us where your pilot is stuck and we will map the integration work with you, starting from the stage in the self-check where you are blocked. You leave knowing the first fix, whether or not you build with us.

Tell us where your pilot is stuck

No obligation. Prefer a time? Book a call. The Free AI Readiness Assessment is planned as the next entry point.

FAQ Industrial AI and IT/OT integration: common questions

What is IT/OT integration?

IT/OT integration connects shop-floor operational technology (PLCs, SCADA, sensors) to top-floor IT systems such as ERP, MES, CMMS and EHS, so floor data can drive business decisions and AI can run on a real line.

Do you work with legacy PLCs?

Yes. Retrofitting legacy PLCs into clean, AI-ready data is the first phase of most engagements.

Can you deploy AI at the industrial edge?

Yes. We deploy and manage models at the edge on hardware such as NVIDIA Jetson, Siemens Industrial Edge or Rockwell FactoryTalk Edge, with central model management across sites.

Have you put an autonomous agent on a client production line yet?

Not yet. No JoulesLabs client AI agent is in live industrial production, so agentic production is our approach, demo-gated, built on agentic production systems.

Which markets do you serve?

We serve teams in the UK, EU, GCC and USA, delivered from Dhaka.

What does an engagement cost?

First contracts typically run between USD 20,000 and 50,000, with any OEM platform licences billed separately, and billing tracks the phases of the work.